Lead2pass provides terrific opportunity to heave your Microsoft skills and capabilities. You can easily pass Microsoft 70-410 exam under the guidence of our 70-410 dumps. Lead2pass ensure 100% pass rate.
Your network contains a server named Server1 that runs Windows Server 2012 R2.
Server1 has the Print and Document Services server role installed.
You connect a new print device to the network.
The marketing department and the sales department will use the print device.
You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the sales users print before the documents from the marketing users.
What should you do on Server1?
A. Add two printers. Modify the priorities of each printer and the security settings of each printer
B. Add two printers and configure printer pooling
C. Add one printer and configure printer pooling.
D. Add one printer. Modify the printer priority and the security settings
To set different print priority to different groups
Open Printers and Faxes.
Right-click the printer you want to set, click Properties, and then click the Advanced tab. In Priority, click the up or down arrows, and then click OK. Or, type a priority level, where 1 is the lowest level and 99 is the highest, and then click OK. Click Add Printer to add a second logical printer for the same physical printer. For instructions, see Related Topics.
Click the Advanced tab.
In Priority, set a priority higher than that of the first logical printer. Instruct the regular group of users to use the first logical printer name and the group with higher priority to use the second logical printer name. Set the appropriate permissions for the different groups.
Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Window Server 2012 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1). Server1 and Server2 are member server.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Remote Server Administration Tools on Server1.
B. Install Windows Management Framework 3.0 on Server2.
C. Install the Windows PowerShell 2.0 engine on Server1.
D. Install Microsoft .NET Framework 4 on Server2.
E. Install Remote Server Administration Tools on Server2
You have a DNS server named Server1. Server1 runs Windows Server 2012 R2.
The network ID is 10.1.1.0/24. An administrator creates several reverse lookup zones.
You need to identify which reverse lookup zone is configured correctly.
Which zone should you identify? To answer, select the appropriate zone in the answer area.
You have a server named Server1. Server1 runs Windows Server 2012 R2. Server1 has two network adapters. Each network adapter must be configured as shown in the following table.
You need to configure the correct IPv6 address prefix for each network adapter.
Which prefix should you select for each network adapter? (To answer, drag the appropriate IPv6 prefix to the correct network adapter in the answer area. Each prefix may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Drag and Drop Question
Your company has a main office that contains 225 client computers. The client computers are located on a subnet that uses the network ID of 10.10.1.0/24.
The company plans to open two branch offices. The offices will be configured as shown in the following table.
You need to select a network prefix for each office to ensure that there are enough IPv4 addresses for each client computer.
The solution must minimize the number of unused IP addresses.
Which network prefixes should you select? To answer, drag the appropriate network prefix to the correct branch office in the answer area.
Your infrastructure divided in 2 sites.
You have a forest root domain and child domain. There is only one DC on site 2 with no FSMO roles. The link goes down to site 2 and no users can log on.
What FSMO roles you need on to restore the access?
A. Infrastructure master
B. RID master
C. Domain Naming master
D. PCD emulator
D. The PDC emulator is used as a reference DC to double-check incorrect passwords and it also receives new password changes.
PDC Emulator is the most complicated and least understood role, for it runs a diverse range of critical tasks. It is a domain-specific role, so exists in the forest root domain and every child domain. Password changes and account lockouts are immediately processed at the PDC Emulator for a domain, to ensure such changes do not prevent a user logging on as a result of multi-master replication delays, such as across Active Directory sites.
multi-master directory concept
You perform a Server Core Installation of window Server 2012 R2 on server named Server1.
You need to add a graphical user interface (GUI) to server1.
Which tool should you use?
A. the Add-WindowsFeature cmdlet
B. the Install-Module cmdlet
C. the setup.exe command
D. the Add-WindowsPackage cmdlet
A. The Add-WindowsFeature cmdlet allows you to install specified roles, role services, and features
B. Not a valid cmdlet
D. Adds a single .cab or .msu file to a Windows image.
Add-WindowsFeature – Allows you to install specified roles, role services, and features
A network technician installs Windows Server 2012 R2 Standard on a server named Server1.
A corporate policy states that all servers must run Windows Server 2012 R2 Enterprise.
You need to ensure that Server1 complies with the corporate policy.
You want to achieve this goal by using the minimum amount of administrative effort.
What should you perform?
A. a clean installation of Windows Server 2012 R2
B. an upgrade installation of Windows Server 2012 R2
C. online servicing by using Dism
D. offline servicing by using Dism
You have a domain controller named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed. Server1 hosts a DNS zone named contoso.com and a GlobalNames zone.
You discover that the root hints were removed from Server1.
You need to view the default root hints of Server1.
What should you do?
A. From Event Viewer, open the DNS Manager log.
B. From Notepad, open the Cache.dns file.
C. From Windows Powershell, run Get-DNSServerDiagnostics.
D. From nslookup, run root server1.contoso.com
A. Allows you to troubleshoot DNS issues
B. DNS Server service implements root hints using a file, Cache.dns, stored in the
systemroot\System32\Dnsfolder on the server
C. Gets DNS event logging details
Your company has a main office and two branch offices. The offices connect to each other by using a WAN link. In the main office, you have a server named Server1 that runs Windows Server 2012 R2. Server1 is configured to use an IPv4 address only.
You need to assign an IPv6 address to Server1. The IP address must be private and routable. Which IPv6 address should you assign to Server1?
Choose Lead2pass you will get:
Most updated collection of Microsoft 70-410 Exam Questions;
Prepare according to the latest Microsoft 70-410 Exam Syllabus;
Product is instantly available for download and use;
24×7 Customer Support on case of problemwith the product.