Passed Microsoft 70-411 Exam with Pass4sure and Lead2pass PDF & VCE 241-250

By | November 11, 2014

Vendor: Microsoft
Exam Code: 70-411
Exam Name: Administering Windows Server 2012 R2 Exam
Version: 14.91

QUESTION 241
You have a DNS server named Server1 that runs Windows Server 2012 R2. On Server1, you create a DNS zone named contoso.com.
You need to specify the email address of the person responsible for the zone.
Which type of DNS record should you configure?

A.    Start of authority (SOA)
B.    Mail exchanger (MX)
C.    Host information (HINFO)
D.    Mailbox (MB)

Answer: A

Explanation:
A SOA-record defines the responsible person for an entire zone, but a zone may contain many individual hosts / domain names for which different people are responsible. The Rprecord type makes it possible to identify the responsible person for individual host names contained within the zone.

QUESTION 242
You have a server named Server1 that runs Windows Server 2012 R2.
You discover that the performance of Server1 is poor.
The results of a performance report generated on Server1 are shown in the following table.

wpsD66D.tmp

You need to identify the cause of the performance issue. What should you identify?

A.    Excessive paging
B.    NUMA fragmentation
C.    Driver malfunction
D.    Insufficient RAM

Answer: C
Explanation:
Processor: %DPC Time. Much like the other values, this counter shows the amount of time that the processor spends servicing DPC requests. DPC requests are more often than not associated with the network interface. Processor: % Interrupt Time. This is the percentage of time that the processor is spending on handling Interrupts. Generally, if this value exceeds 50% of the processor time you may have a hardware issue. Some components on the computer can force this issue and not really be a problem. For example a programmable I/O card like an old disk controller card, can take up to 40% of the CPU time. A NIC on a busy IIS server can likewise generate a large percentage of processor activity.
Processor: % User Time. The value of this counter helps to determine the kind of processing that is affecting the system. Of course the resulting value is the total amount of non-idle time that was spent on User mode operations. This generally means application code.
Processor: %Privilege Time. This is the amount of time the processor was busy with Kernel mode operations. If the processor is very busy and this mode is high, it is usually an indication of some type of NT service having difficulty, although user mode programs can make calls to the Kernel mode NT components to occasionally cause this type of performance issue.
Memory: Pages/sec. This value is often confused with Page Faults/sec. The Pages/sec counter is a combination of Pages Input/sec and Pages Output/sec counters. Recall that Page Faults/sec is a combination of hard page faults and soft page faults. This counter, however, is a general indicator of how often the system is using the hard drive to store or retrieve memory associated data.
http://technet.microsoft.com/en-us/library/cc768048.aspx

QUESTION 243
Your network contains an Active Directory domain named contoso.com.
All servers run Windows Server 2012 R2. An organizational unit (OU) named ResearchServers contains the computer accounts of all research servers.
All domain users are configured to have a minimum password length of eight characters.
You need to ensure that the minimum password length of the local user accounts on the research servers in the ResearchServers OU is 10 characters.
What should you do?

A.    Create a universal group that contains the research servers. Create a Password Settings object
(PSO) and assign the PSO to the group.
B.    Configure a local Group Policy object (GPO) on each research server.
C.    Create and link a Group Policy object (GPO) to the ResearchServers OU.
D.    Create a global group that contains the research servers. Create a Password Settings object
(PSO) and assign the PSO to the group.

Answer: C
Explanation:
For a domain, and you are on a member server or a workstation that is joined to the domain
1. Open Microsoft Management Console (MMC).
2. On the File menu, click Add/Remove Snap-in, and then click Add.
3. Click Group Policy Object Editor, and then click Add.
4. In Select Group Policy Object, click Browse.
5. In Browse for a Group Policy Object, select a Group Policy object (GPO) in the appropriate domain, site, or organizational unit–or create a new one, click OK, and then click Finish.
6. Click Close, and then click OK.
7. In the console tree, click Password Policy.
Where?
Group Policy Object [computer name] Policy/Computer Configuration/Windows
Settings/Security Settings/Account Policies/Password Policy
8. In the details pane, right-click the policy setting that you want, and then click Properties.
9. If you are defining this policy setting for the first time, select the Define this policy setting check box.
10. Select the options that you want, and then click OK.

QUESTION 244
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains an Edge Server named Server1.
Server1 is configured as a DirectAccess server. Server1 has the following settings:

wps1ADD.tmp

Your company uses split-brain DNS for the contoso.com zone.
You run the Remote Access Setup wizard as shown in the following exhibit. (Click the Exhibit button.)

wps3927.tmp

You need to ensure that client computers on the Internet can establish DirectAccess connections to Server1.
Which additional name suffix entry should you add from the Remote Access Setup wizard?

A.    A Name Suffix value of dal.contoso.com and a blank DNS Server Address value
B.    A Name Suffix value of Server1.contoso.com and a DNS Server Address value of 65.55.37.62
C.    A Name Suffix value of Server1.contoso.com and a blank DNS Server Address value
D.    A Name Suffix value of dal.contoso.com and a DNS Server Address value of 65.55.37.62

Answer: A
Explanation:
For split-brain DNS deployments, you must list the FQDNs that are duplicated on the Internet and intranet and decide which resources the DirectAccess client should reach, the intranet version or the public (Internet) version. For each name that corresponds to a resource for which you want DirectAccess clients to reach the public version, you must add the corresponding FQDN as an exemption rule to the NRPT for your DirectAccess clients.
Name suffixes that do not have corresponding DNS servers are treated as exemptions.
http://technet.microsoft.com/en-us/library/ee382323(v=ws.10).aspx

QUESTION 245
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. Client computers run either Windows 7 or Windows 8. All of the client computers have an application named App1 installed. The domain contains a Group Policy object (GPO) named GPO1 that is applied to all of the client computers.
You need to add a system variable named App1Data to all of the client computers.
Which Group Policy preference should you configure?

A.    Services
B.    Ini Files
C.    Environment
D.    Data Sources

Answer: C
Explanation:
Environment Variable preference items allow you to create, update, replace, and delete user and system environment variables or semicolon-delimited segments of the PATH variable. Before you create an Environment Variable preference item, you should review the behavior of each type of action possible with this extension.

QUESTION 246
Drag and Drop Question
Your network contains an Active Directory forest named contoso.com. All domain controllers run Windows Server 2008 R2. The schema is upgraded to Windows Server 2012 R2. Contoso.com contains two servers. The servers are configured as shown in the following table.

wps586B.tmp

Server1 and Server2 host a load-balanced application pool named AppPool1.
You need to ensure that AppPool1 uses a group Managed Service Account as its identity.
Which three actions should you perform?
To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

wps6DCF.tmp

Answer:

wps7EF0.tmp

QUESTION 247
Your network contains a Hyper-V host named Hyperv1. Hyperv1 runs Windows Server 2012 R2. Hyperv1 hosts four virtual machines named VM1, VM2, VM3, and VM4. All of the virtual machines run Windows Server 2008 R2.
You need to view the amount of memory resources and processor resources that VM4 currently uses.
Which tool should you use on Hyperv1?

A.    Resource Monitor
B.    Task Manager
C.    Hyper-V Manager
D.    Windows System Resource Manager (WSRM)

Answer: C

QUESTION 248
You have a server named Server1 that runs Windows Server 2012 R2.
You create a custom Data Collector Set (DCS) named DCS1.
You need to configure Server1 to start DCS1 automatically when the network usage exceeds 70 percent.
Which type of data collector should you create?

A.    A configuration data collector
B.    A performance counter data collector
C.    An event trace data collector
D.    A performance counter alert

Answer: D
Explanation:
Performance alerts notify you when a specified performance counter exceeds your configured threshold by logging an event to the event log. But rather than notifying you immediately when the counter exceeds the threshold, you can configure a time period over which the counter needs to exceed the threshold, to avoid unnecessary alerts.

wps9DC7.tmp

QUESTION 249
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the following role services installed:

– DirectAccess and VPN (RRAS)
– Network Policy Server

Remote users have client computers that run either Windows XP, Windows 7, or Windows 8. You need to ensure that only the client computers that run Windows 7 or Windows 8 can establish VPN connections to Server1. What should you configure on Server1?

A.    A vendor-specific RADIUS attribute of a Network Policy Server (NPS) connection request policy
B.    A condition of a Network Policy Server (NPS) network policy
C.    A condition of a Network Policy Server (NPS) connection request policy
D.    A constraint of a Network Policy Server (NPS) network policy

Answer: B
Explanation:
If you want to configure the Operating System condition, click Operating System, and then click Add. In Operating System Properties, click Add, and then specify the operating system settings that are required to match the policy.
The Operating System condition specifies the operating system (operating system version or service pack number), role (client or server), and architecture (x86, x64, or ia64) required for the computer configuration to match the policy.

QUESTION 250
You manage a server that runs Windows Server 2012 R2. The server has the Windows Deployment Services server role installed.
You start a virtual machine named VM1 as shown in the exhibit. (Click the Exhibit button.)

wpsBD49.tmp

You need to configure a pre-staged device for VM1 in the Windows Deployment Services console.
Which two values should you assign to the device ID?
(Each correct answer presents a complete solution. Choose two.)

A.    979708BFC04B45259FE0C4150BB6C618
B.    979708BF-C04B-4525-9FE0-C4150BB6C618
C.    00155D000F1300000000000000000000
D.    0000000000000000000000155D000F13
E.    00000000-0000-0000-0000-C4150BB6C618

Answer: BD
Explanation:
Use client computer’s media access control (MAC) address preceded with twenty zeros or the globally unique identifier (GUID) in the format: {XXXXXXXX-XXXX-XXXX-XXX- XXXXXXXXXXXX}.
http://technet.microsoft.com/en-us/library/cc754469.aspx

If you want to pass Microsoft 70-411 exam successfully, donot missing to read latest lead2pass Microsoft 70-411 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/70-411.html