[Full Version] Lead2pass Cisco 500-260 Exam Dumps Free Download (41-50)

By | January 25, 2017

2017 January Cisco Official New Released 500-260 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

There is no need to hassle if you are stuck in the 500-260 exam difficulties, Lead2pass will assist you right through 500-260 exam with 500-260 PDF and VCE dumps. Lead2pass delivers the most comprehensive 500-260 exam preparation material, covering each and every aspect of 500-260 exam curriculum. We ensure you 100% success in 500-260 exam.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/500-260.html

QUESTION 41
Which three actions are supported by file policies? (Choose three.)

A.    malware cloud lookup
B.    Spero dynamic analysis
C.    block files
D.    detect malware
E.    bypass
F.    block malware

Answer: ACF

QUESTION 42
Which statement describes what happens during a file-disposition check for malware?

A.    The managed device extracts the pieces of file from the data stream, calculates a hash on each piece, and forwards each piece to the cloud for checking.
If all pieces are clean, the original file is forwarded to the destination.
B.    The managed device extracts all pieces of a file before calculating a hash on the complete file. Each piece is forwarded to the destination with the final piece being released if the entire file is deemed clean.
C.    The managed device extracts all pieces of a file before calculating a hash on the complete file.
If the entire file is deemed clean, it is forwarded to the destination.
D.    The managed device extracts the pieces of file from the data stream, calculates a hash on each piece, and forwards each piece to the cloud for checking.
All pieces are also forwarded to the destination with the last piece being forwarded if it is deemed clean.

Answer: B

QUESTION 43
Which three options are assignable file dispositions? (Choose three.)

A.    malware
B.    unassigned
C.    custom detection
D.    user-defined
E.    permit
F.    unknown

Answer: ACF

QUESTION 44
On Cisco ASA Software Version 8.3 and later, which two statements correctly describe the NAT table or NAT operations? (Choose two.)

A.    The NAT table has four sections.
B.    Manual NAT configurations are found in the first (top) and/or the last (bottom) section(s) of the NAT table.
C.    Auto NAT also is referred to as Object NAT.
D.    Auto NAT configurations are found only in the first (top) section of the NAT table.
E.    The order of the NAT entries in the NAT table is not relevant to how the packets are matched against the NAT table.
F.    Twice NAT is required for hosts on the inside to be accessible from the outside.

Answer: BC

QUESTION 45
An inside client on the 10.0.0.0/8 network connects to an outside server on the 172.16.0.0/16 network using TCP and the server port of 2001. The inside client negotiates a client port in the range between UDP ports 5000 to 5500. The outside server then can start sending UDP data to the inside client on the negotiated port within the specified UDP port range.
Which two options show the required Cisco ASA command(s) to allow this scenario? (Choose two.)

A.    access-list INSIDE line 1 permit tcp 10.0.0.0 255.0.0.0 172.16.0.0 255.255.0.0 eq 2001
access-group INSIDE in interface inside
B.    access-list INSIDE line 1 permit tcp 10.0.0.0 255.0.0.0 172.16.0.0 255.255.0.0 eq 2001
access-list INSIDE line 2 permit udp 10.0.0.0 255.0.0.0 172.16.0.0 255.255.0.0 eq established access-group INSIDE in interface inside
C.    access-list OUTSIDE line 1 permit tcp 172.16.0.0 255.255.0.0 eq 2001 10.0.0.0 255.0.0.0
access-list OUTSIDE line 2 permit udp 172.16.0.0 255.255.0.0 10.0.0.0 255.0.0.0 eq 5000-5500 access-group OUTSIDE in interface outside
D.    access-list OUTSIDE line 1 permit tcp 172.16.0.0 255.255.0.0 eq 2001 10.0.0.0 255.0.0.0
access-list OUTSIDE line 2 permit udp 172.16.0.0 255.255.0.0 10.0.0.0 255.0.0.0 eq established access-group OUTSIDE in interface outside
E.    established tcp 2001 permit udp 5000-5500
F.    established tcp 2001 permit from udp 5000-5500
G.    established tcp 2001 permit to udp 5000-5500

Answer: AG

QUESTION 46
When the Cisco ASA appliance is processing packets, which action is performed first?

A.    Check if the packet is permitted or denied by the inbound interface ACL.
B.    Check if the packet is permitted or denied by the outbound interface ACL.
C.    Check if the packet is permitted or denied by the global ACL.
D.    Check if the packet matches an existing connection in the connection table.
E.    Check if the packet matches an inspection policy.
F.    Check if the packet matches a NAT rule.

Answer: D

QUESTION 47
Refer to the exhibit. Which command enables the stateful failover option?

471

A.    failover link MYFAILOVER GigabitEthernet0/2
B.    failover lan interface MYFAILOVER GigabitEthernet0/2
C.    failover interface ip MYFAILOVER 172.16.5.1 255.255.255.0 standby 172.16.5.10
D.    preempt
E.    failover group 1
F.    primary
G.    failover lan unit primary

Answer: A

QUESTION 48
Which three action ranges are in the NG IPS profile? (Choose three.)

A.    block only
B.    block and monitor
C.    block and do not monitor
D.    allow only
E.    allow and monitor
F.    allow and do not monitor

Answer: BEF

QUESTION 49
Refer to the exhibit. After a remote user established a Cisco AnyConnect session from a wireless card through the Cisco ASA appliance of a partner to a remote server, the user opened the Cisco AnyConnect VPN Client Statistics Details screen.
What are the two sources of the IP addresses that are marked A and B? (Choose two.)

491

A.    IP address that is assigned to the wireless Ethernet adapter of the remote user
B.    IP address that is assigned to the remote user from the Cisco ASA address pool
C.    IP address of the Cisco ASA physical interface of the partner
D.    IP address of the Cisco ASA virtual HTTP server of the partner
E.    IP address of the default gateway router of the remote user
F.    IP address of the default gateway router of the partner Answer: BC

Answer:

QUESTION 50
Refer to the exhibit. A NOC engineer needs to tune some postlogin parameters on an SSL VPN tunnel. From the information shown, where should the engineer navigate to, in order to find all the postlogin session parameters?

501

A.    “engineering” Group Policy
B.    “contractor” Connection Profile
C.    DefaultWEBVPNGroup Group Policy
D.    DefaultRAGroup Group Policy
E.    “engineer1” AAA/Local Users

Answer: A

We highly recommend our 500-260 dumps. Comparing with others’, Lead2pass is the most credible and authentic source of information on 500-260 exam and we strive to keep our 500-260 dumps up-to-date and reliable on a consistent basis. Our exam preparation material is rich in variety. We offer 500-260 PDF format and 500-260 practice test with free VCE player. That’s the reason why many candidates choose Lead2pass.

500-260 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDUVRuaVllQi1YNlE

2017 Cisco 500-260 exam dumps (All 79 Q&As) from Lead2pass:

http://www.lead2pass.com/500-260.html [100% Exam Pass Guaranteed]