Free Lead2pass 70-246 PDF and VCE Dumps — 100 Percent Pass Guarantee (51-60)

By | December 4, 2014

Lead2pass new Microsoft 70-246 brian dumps are designed to help you  out in a short time. You can get Lead2pass 70-246 brain dumps to pass your exam.Our 70-246 brain dumos will make your exam much easier.

QUESTION 51
Hotspot Questions
Your company help desk uses System Center 2012 Service Manager to manage and track problems.
You need to ensure that the manager of the help desk is notified automatically when a high-priority incident is updated.
What should you configure? To answer, select the appropriate configuration in the answer area.

wps324C.tmp

Answer:

wps6667.tmp

Explanation:
http://technet.microsoft.com/en-us/library/ff460891.aspx
Before notifications are sent, first configure each notification channel, such as the settings for Simple Mail Transfer Protocol (SMTP). Notification messages are sent based on a notification template. Therefore, you will need to create a notification template.
You can then use the Notification Subscription wizard to subscribe a group of users to a notification that will be sent whenever the changes that you specify occur.
Finally, you can verify that a notification is sent by manually generating the change.

QUESTION 52
Your company has a private cloud that contains a System Center 2012 infrastructure. The network contains a Service Manager infrastructure and a Configuration Manager infrastructure. You create a configuration baseline for desired configuration management.
You need to ensure that an incident is created automatically in Service Manager when a device is non-compliant.
You install the Configuration Manager connector for Service Manager.
What should you do next?

A.    Create a Desired Configuration Management Event Workflow Configuration.
B.    Create a service level objective (SLO) for the desired configuration management incident.
C.    Create an incident template.
D.    Import the Configuration Manager Management Packs.

Answer: A

QUESTION 53
Hotspot Question
You have a System Center 2012 R2 infrastructure that contains three servers.
The servers are configured as shown in the following table.

wpsB38E.tmp

You need to create a self-service request offering that will allow users to provision new virtual machines.
On which server should you perform each of the following actions? To answer, select the appropriate server for each action in the answer area.

wpsFBB6.tmp

Answer:

wps2F44.tmp

QUESTION 54
Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infra structure.
You have a line-of-business web application named App1. App1 stores its information in a dedicated Microsoft SQL Server 2008 database.
You need to create a central diagram that contains the complete health information of Appl.
You import the SQL, IIS, and Windows Server management packs.
What should you create next?

A.    a dashboard view
B.    a distributed application model
C.    a Service Level Dashboard
D.    a diagram view

Answer: B
Explanation:
You need to create a distributed application first to be able to create the service level dashboard.
First a DA, followed by a service level objective, and finally a Service Level Dashboard.
http://technet.microsoft.com/en-us/library/hh212692.aspx
http://technet.microsoft.com/en-us/library/hh230719.aspx

QUESTION 55
Drag and Drop Questions
Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure.
You need to ensure that members of a group named Group1 can resolve printing alerts by using the Operations Manager console.
The solution must minimize the number of Operations Manager permissions assigned to Group1.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

wps7079.tmp

Answer:

wps9BAF.tmp

Explanation:
1. Import the Windows Server Print Server Management Pack – Required for monitoring printing
http://technet.microsoft.com/en-us/library/cc181012.aspx
2. Create an Operator User Role – Required to add Group1 to SCOM
3. Scope the User Role – To set this role to access print alerts only
No – Create an event viewer alert, technically feasible to set logging of print queues and then monitor events but Microsoft always asked for the BEST solution, hence the Print MP
No – Create a Subscription, there is no mention of notifications in the question
No – Create a run as account, the question says resolve the print ALERT not the fault itself

QUESTION 56
Your company has a datacenter in Los Angeles that contains a System Center 2012 Operations Manager infrastructure.
You create three unsealed management packs named Pack1, Pack2, and Pack3.
You create an override for Pack1.
You create a group in Pack2.
You need to apply the override for Pack1 to the group in Pack2.
What should you do before you apply the override?

A.    Seal Pack1.
B.    Create a new class in Pack3.
C.    Create a new class in Pack1.
D.    Seal Pack2.
E.    Create a new class in Pack2.

Answer: D
Explanation:
When you create a group, you save it to an unsealed management pack. However, an element in an unsealed management pack, such as a group, cannot reference an element in a different unsealed management pack, such as an override or a view. If you are going to use a group to target an override or scope a view, you must either save the group to the same unsealed management pack as the override or view, or you must seal the management pack that contains the group. If you save the group to the same unsealed management pack as the override or view, you can only use that group for overrides and views that are also contained in that unsealed management pack. If you seal the management pack that contains the group, you can reference that group from other unsealed management packs. However, you cannot easily change any group settings in the sealed management pack or add new groups to the sealed management pack.
http://www.code4ward.net/main/Blog/tabid/70/EntryId/130/Implications-when-using-groups-from-a-sealed-MPfor-overrides.aspx

QUESTION 57
Hotspot Questions
Your company has a private cloud that contains a System Center 2012 Service Manager infrastructure. The help desk uses Service Manager to manage and track incidents. Service desk analysts report that they receive many Windows 7-related incidents.
You need to create a classification for the Windows 7-related incidents.
What should you configure to create the classification? To answer, select the appropriate configuration in the answer area.

wpsE8F5.tmp

Answer:

wps20A8.tmp

Explanation:
https://www.youtube.com/watch?v=QRWRKL6zA5k
http://social.technet.microsoft.com/Forums/systemcenter/en-US/3c092cb3-734e-4fa3-ba7a-5b5fc9966651/scsm-2012-sorting-of-incident-classification

QUESTION 58
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. You discover that several users create incidents for the same issue by using the Self-Service Portal. Over 100 incidents are created.
You need to ensure that all of the incidents can be resolved as quickly as possible.
What should you do?

A.    create a service level objective (SLO).
B.    Create a queue.
C.    Select the Link to New Parent Incident task.
D.    Select the Escalate or Transfer the Incidents task.

Answer: C

QUESTION 59
Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The network contains an Operations Manager infrastructure and a Virtual Machine Manager (VMM) infrastructure.
You implement a Microsoft SharePoint Server 2010 farm that is hosted on 10 virtual machines. The company defines a service level agreement (SLA) for the farm’s availability of at least 99.9 percent uptime.
You need to ensure that the company’s compliance officer can identify whether the SLA requirement is met.
What should you do?

A.    Create a distributed application that contains the servers and the services used by the farm.
Create a Service Level Tracking object for the distributed application.
Add a service level objective (SIO), and then set the goal to 99.9 percent.

B.    Create a group, and then add all of the farm servers to the group.
Create a Service Level Tracking object.
Add a service level objective (SLO), and then set the goal to 99.9 percent.

C.    Create a group, and then add all of the farm servers to the group.
Create a performance collection rule for each front-end Web server m the farm.
Configure an alert if network availability falls below 99.9 percent.

D.    Create a distributed application that contains the servers and the services used by the farm.
Create a performance collection rule for each front-end Web server in the farm.
Configure an alert if network availability falls below 99.9 percent.

Answer: A
Explanation:
Adding only the servers doesn’t mean, that the services (SharePoint) are available.
So it must be a distributed application.
http://technet.microsoft.com/en-us/library/hh230719
http://technet.microsoft.com/en-us/library/hh457612.aspx

QUESTION 60
Your company has a private cloud that contains a System Center 2012 Service Manager infrastructure.
You need to create a service level objective (SLO) for incidents that have a priority value of 1. What should you create first?

A.    a service template
B.    a queue
C.    a channel
D.    a rule

Answer: B
Explanation:
Queues are used in SCSM 2012 SLA Management to apply the SLA to a group of work items. http://blogs.technet.com/b/servicemanager/archive/2012/01/25/scsm-2012-service-level- management.aspx

Being a Microsoft 70-246 certified professional guarantee a better future and success for you. Lead2pass Microsoft certification preparation exams would prove themselves to be the most helpful step in the direction of that Microsoft goal. You can easily find  Microsoft preparation material for all certifications in Lead2pass by visiting our website below:

http://www.lead2pass.com/70-246.html